MERIT DRILLING FOAM WIPER BALL

MERIT DRILLING FOAM WIPER BALL, FOAM WIPER BALL FOR DRILL PIPE CLEANING, NATURAL RUBBER, 6″, FOAM WIPER, FOR DRILL PIPE CLEANING FROM SOFT CEMENT.

MERIT DRILLING FOAM WIPER BALLS

MERIT DRILLING FOAM WIPER BALL, FOAM WIPER BALL FOR DRILL PIPE CLEANING or FOAM WIPER BALL FOR CLEANING UP THE DRILL PIPE AND TUBING FROM SOFT CEMENT AFTER CEMENTING OPERATION.

MERIT DRILLING FOAM WIPER BALL, SIZE 6″ TO COVER ALL TYPES AND SIZES OF DP FROM 5 1⁄2″ TO 2 7/8″AND CAN GO THROUGH THE SMALLEST RESTRICTION IN THE LINER SETTING TOOL ( 2 3⁄4″ FOR 7″ LINER AND 3 3⁄4″ FOR 9 5/8″ LINER).

GENERAL SIZE REFERENCE : 6.00 INCH
TYPICAL WIPING RANGE (PIPE ID) : 4.75 IN TO 2.00 IN
MINIMUM RESTRICTION : 0.875 IN
MATERIAL: NATURAL RUBBER
TEMPERATURE RANGE : 40°F (4°C) TO 302°F (150°C).

THE BALL TO HAS A PARTING STRETCH OF 380 TO 440%, AND TO PASS THROUGH SMALL RESTRICTIONS WITHOUT BEING DAMAGED.

THE WIPER BALL WILL BE LOADED INTO DRILL PIPE OR TUBING CONNECTIONS AFTER PLACING CEMENT PLUG AND DURING CIRCULATION OR AFTER FINISH A LINER CEMENT JOB DURING CIRCULATION FOR CLEANING UP THE PIPE IT MUST EASILY PASSES THROUGH INTERNAL UPSET RESTRICTIONS SUCH AS MECHANICAL SETTING TOOLS, DIVERTERS, AND LINER RUNNING TOOLS, AND MULTIPLE BALLS CAN BE PUMPED IF NECESSARY.

FOAM WIPER BALLS WILL BE USED WITH ALL TYPES OF DRILLING AND DISPLACEMENT FLUIDS.
Advertisements