Drill pipe wiper ball

Drill pipe wiper ball.

 

Drill pipe wiper balls
Drill pipe wiper ball

Drill pipe wiper ball

Drill pipe wiper ball

Drill pipe wiper ball

Drilling foam wiper ball. Drilling foam wiper ball by Merit is a wiping out item for drill pipe and casing after each cementing job. After finish the cement press, operator put foam wiper ball into pipe or casing to clean out it. It is very hard and vital job for the success of drilling.

Our foam wiper ball is producing under internal specification formulation ZKF-10. It is a sofisticated only for drilling and cementing post application land and sea well. Elasticity of the foam wiper ball is proper nominal 1 inch minimal. Sector accepts 25,4mm pipe to minimize for piping as known.

A foam wiper ball we produce is workable from -40 centigrade to 300 centigrade as pratic. But nominal flash point of our foam wiper ball is higher than this. We certified it with MSDS. MSDS means Material Safety Data Sheet. Our MSDS updated 27-01-2015
after independent laboratory test and experiment.
We are supplying well drill foam wiper ball to oil and gas sector since 2005. We got very great result from our customers worldwide Texas, Ontario, Mexico, Erbil, Dubai, Sharjah, Oman, Jakarta, Nilai, Perth, Kazakhstan, New Zealand, etc.

We got many emails from well drillers tell us thank you and thank you much. Some customers told us that our foam wiper ball extends its drill pipe life up to highest lever nominally.

If you look for a professional of the cementing job, you are right here. Please feel free to request a quote or information from us without hesitations. We promise to reply you as short as possible.

You are feel free to send us product enquiries, request for quotation within 7 days 24hours via our email, sms, mms, mobile phone, website, social media, blog, marketplace.

Advertisements