(6″, typical wiping range 2.0″ to 4.75″, minimal restriction 0.875″, temperature range 40℉ (4℃) to 302℉ (150℃), parting stretch of 380 to 440%)
Temperature range of 40°F (4°C) to 302°F (150°C) foam wiper balls.
The Merit Foam Balls could be pumped after cementing job to assist fluid separation and wipe the deposition within the tubular
Merit Wiper Ball is designed to clean residual cement, drilling fluids or debris in drill pipes or tubing strings, which also can be used for fluid separation.
13” wiper ball to be using it in 10” tremie pipe to separate the water being used to prime the pipe and the material being pumped in behind it.
Drill pipe wiper balls 5″
Drill pipe wiper balls Houston
DRILL PIPE WIPER BALL 8 IN MEDIUM FOAM 101319281
After a cementing, foam wiper balls are a used to avoid potential residual cement, fluids or debris, setting and building up on the ID of the pipe. However, competently loading the large foam balls into the restrictive tool joint is challenging and can involve the use of expensive equipment and the safety risks associated with manual handling and machinery.
8” ball (200mm). With a wiper out range of 3” to 7” (76 – 178mm). Min restriction 35mm.
BALL DRILLPIPE WIPER 7″ MEDIUM FOAM 175MM 5002067